|Place of Origin:||China (Mainland)|
|Model Number:||Biomass/Gas&Oil Fired Steam Boiler|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wood packet|
|Delivery Time:||15 days|
|Supply Ability:||5 sets a month|
|Product Name:||LSH Series 0.1 Ton Vertical Industrial Biomass Steam Boiler||Steam Capacity:||0.1t|
|Usage:||Ndustrial, Power, Central Heating, Paper Mill, Industry/Power Station||Dimension:||0.81*2.59m|
|Warranty:||2 Years||Color:||Customer's Requirement|
wood chip boiler,
waste wood boiler
LSH Series Vertical Biomass Fired Steam Boiler
The boiler model LSH0.9-0.7-T, is a vertical flushing tube burning material steam boiler, the bottom of the furnace tank is equipped with fuel equipment; The boiler has a combustion chamber and a horizontal tube in the upper part of the combustion chamber, the main function of which is to increase the heating area of the boiler itself and to improve the thermal efficiency; the boiler is also equipped with a economizer so that the high-temperature flue gas can be reused.
After the fuel is burned on the fuel equipment, the flame directly radiates the furnace tank and the horizontal pipe, the flue gas passes through the horizontal pipe to block the flue gas into the boiler flue ring, the flue gas passes through the flue loop into the economizer, and is pumped into the dust collector by the induced fan. After dust removal, the flue gas enters the chimney, and finally the purified flue gas is discharged into the atmosphere through the chimney. Part of the ash falls into the ash pool in the base through the vent hole of the fuel equipment, and then passes through the ash gate to carry out the artificial slag discharge; the part is brought into the rear flue by the flue gas, and falls into the bottom ash pool of the economizer, the sludge pool of the bottom of the precipitator, and the sludge pool of the bottom of the dust collector through artificial discharge.
1. Installation convenience:
The boiler is generally fast-loading factory, easy to transport and on-site installation, greatly shorten the construction cycle, save installation costs, so that the boiler can be put into production in time.
Boiler heating surface layout is reasonable, water circulation is smooth, and each heating surface is cooled in time, so as to effectively ensure the safe operation of the boiler.
3.Maintenance and repair convenience:
Boiler drum set up manhole, can enter inspection repair. It is convenient to open the smoke box in front of the boiler, and the personnel can check it easily and clearly, which provides a good condition for correct treatment.
With the secondary air and reasonable furnace design, the fuel can be fully burned and the black smoke can be eliminated.
5.High efficiency grate:
Boiler grate adopts double side ventilation, which is brought naturally to the front end of boiler row by dust cleaning technology, which avoids air leakage, fuel leakage and uneven ventilation, and is easy to operate, and has obvious advantages compared with ordinary grate.
6.Convenient ash cleaning:
Many ash cleaning holes can be set up on the boiler, which can remove ash in time and effectively, avoid the trouble of operation and decrease of thermal efficiency caused by boiler ash accumulation, and ensure the stability of boiler load.
|Feed Water Temperature||℃||20||20||20||20||20||20|
Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
External and Interface Dimension of SZL Biomass steam boiler
|Maximum Transport Weight||/||t||0.72||0.98||1.6||2.88||3.67||4.8|
|Main Steam Valve Pipe Diameter||DN||mm||32||32||40||50||50||50|
|Feed Water Valve||DN||mm||25||25||25||25||25||32|
|Safety Valve Diameter||DN||mm||40||40||40||40||2*40||2*40|
|Drain Valve Pipe Diameter||DN||mm||40||40||40||40||40||40|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
Contact Person: Xu