|Place of Origin:||China(Mainland)|
|Model Number:||Biomass Heat Carrier Boiler|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wood packet|
|Delivery Time:||15 days|
|Supply Ability:||5 SETS per month|
|Thermal Power:||1000-7000KW||Working Pressure:||1.0MPa|
|Warrary:||2 Years||Usage:||Industrial,Crude Oil Thermal Recovery|
thermal fluid boiler,
biomass wood boiler
YLW Series Horizontal Chain Grate Biomass Thermal Oil Boiler
YLW series horizontal chain grate biomass thermal oil boiler, also called organic heat carrier boiler, using wood, straw, rice husk, biomass pellet as fuel, and using thermal oil as medium, through hot oil circulation pump forced medium liquid phase circulation, after transport thermal energy to the use of thermal equipment, return back to furnace for reheating, with the performance characteristics of acquire high temperature under low pressure, its heating temperature can reach to liquid phase 320℃ or vapor phase 400℃. Any production line which need evenly and steadily heating, and not allow the flame heating directly, the temperature between 250℃ with 380℃ all can use thermal oil boiler supply heating. This series of boiler use mechanical chain grate burning technology, front boiler host is furnace radiation heating area, made of closely double square coiled tubes, back boiler host is convection heating area, made of S-shape tubes. The boiler made of upper boiler host and bottom chain grate, install and assemble on site. Air preheater is set end of boiler host. In furnace, fuel burning produced high temperature flue gas and was absorbed by some of heat, pass steering smokebox enter into convection heating area to transfer heat, flue gas out of boiler was absorbed waste heat by heat exchanger at boiler end, and then pass deduster enter into chimney by draft fan, finally discharge into atmosphere.
YLW use to Chemical Industry,Oil and Grease Industry,Petrochemical Industry,Plastic & Rubber Industry,Textile & Printing and Dyeing Industry,
Fiber Industry,Food Industry,Building Materials Industry, and so on.
1. Easy Installation:
Generally, the boiler divided into up and down parts, easy to transport and install at site, greatly shorten the period of installation, save the installation costs, to make the boiler go into production timely.
2. Reliable Operation:
The heating surface of boiler is reasonably settled, thermal oil circulation fluent, to ensure that each heating furnace cool down timely, and ensure the boiler running safety.
4. Full Combustion:
The boiler furnace is higher, fuel can be fully burning, in the cooperation of secondary air, can remove the black smoke
6. Easy to Remove Ash:
Set soot blower at convection heat transfer zone of boiler, can remove ash timely and efficiently, to avoid ash deposition in boiler making the boiler running is affected or thermal efficiency is dropped etc. To ensure stability of boiler loading.
Main Technical Parameters of YLW Series Biomass Heat Carrier
|Heating Load X104||Kcal/h||80||120||160||250||300||400||600|
|Rated oil output temperature||℃||300||300||280||300||300||320||320|
|Rated oil return temperature||℃||280||280||265||280||280||295||300|
|Main engine oil capacity||m3||0.65||0.71||2.8||3.4||4.35||4.94||7.6|
Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
|Maximum Part Transport Dimension||L||mm||4400||5500||6380||5720||6470||6460||7040|
|Oil Outlet Pipe Diameter||DN||mm||65||125||125||150||200||200||250|
|Oil Return Pipe Diameter||DN||mm||40||125||125||150||200||200||250|
|Exhaust Pipe Diameter||DN||mm||2*25||2*25||25||25||25||2*25||2*25|
|Drain Valve Pipe Diameter||DN||mm||2*25||2*25||25||25||40||2*25||2*25|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
Contact Person: Xu