|Place of Origin:||China (Mianland)|
|Model Number:||LSS Oil Fired Steam Generator|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wood packet|
|Delivery Time:||15 days|
|Supply Ability:||5 sets per month|
|Product Name:||Custom-made Factory Outlets LSS Series Oil Fired Steam Generator||Steam Capacity:||50-200kg|
|Steam Temperature:||151-171℃||Color:||Customer's Requirement|
|Usage:||Industrial, School, Restaurant||Type:||Natural Circulation|
|After-sales Service Provided:||Engineers Available To Service Machinery Overseas||Pressure:||Low Pressure|
thermal oil steam generator,
high pressure steam generator
LSS Oil Fired Steam Generator
The vertical steam provided by the LSS accepts the structure of the vertical pipe. A special protective tube between the two lower rings and the upper and lower protective tubes produces three gases. Zoom in and burn
The heat efficiency of the heat sinks and capacitors can be from 93 to 100%. Use a steam water separator and external steam. The water dispenser saves high quality dry fuel, reduces system size and extends service life.
1. Easy to maintain:
There is an inspection door at the bottom for checking and cleaning the inside of the oven for easy maintenance.
2. Must meet environmental requirements:
Efficient and reliable burners burn all fuels, but greatly reduce the emission of hazardous waste. The test results from various departments show that the gas (gas) steam meets the environmental requirements of the environment.
3. The amount of evaporation can be increased:
The steam engine can be designed by many units (without restriction) and can be controlled by a computer. You can add shared tasks. The plant produces a large amount of steam energy (water purification, pumps, burners, electronic control panels and main valve blocks).
4. Installation completed:
Water, electricity and steam pipes can be connected to the site, saving time and installation work.
5. Reliable accessories:
Provide vodka, control box, water purifier and valve, national pump quality equipment support. The support system provides safe and reliable steam action to achieve and improve the quality of steam power.
|Main Technical Reference for Fuel (Gas) Steam Generator|
|Rated Pressure PTEPREppoPressure||MPa||0.4/0.7|
|Rated steam temperature||c||151/171|
|Rated feed water temperature||°C||20|
|Applicable Fuel||/||Gas light oil|
|Theoretical fuel consumption||Gas||NM3/h||4||8||12||16|
|Gas supply pressure||mbar||60- 100|
Note: The fuel consumption in the table is based on the low calorific value of biomass particles 17084 KJ/Kg (4085 Kcal/Kg).Calculations show that if the low calorific value of biomass fuel is higher than that, the corresponding fuel consumption will be more economical than the values in the table.
|Configuration and Interface Size of Fuel (Gas) Steam Generator|
Outward Size of Main Engine
(length * width * height)
|Mainframe Transport Weight||DN||mm||G 1/2-||Gl'||Gl"||G 1*|
|Main Steam Valve Pipe Diameter||DN||mm||Gl/2"||Gl/2-||Gl/2-||Gl/2°|
|Feed Water Valve||DN||mm||G1 1/4”||G11/4-||G11/4-||G11/4-|
|Safety Valve Diameter||DN||mm||Gf||GF||Gl"||Gl"|
|Drain Valve Pipe Diameter||DN||mm||133||133||159||159|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
Contact Person: Xu